In order to demonstrate all features of the Glass Wallback Planner, we have compiled a short instruction, giving you a step-by-step support during the configuration and order process.
Brilliant colours, pin sharp images and varied material properties. This is the formula for design highlights in glass. By means of a self-created motif or chosen from the vast range. The glass wallback panels emphasize modern design – in kitchens or bathrooms and in furniture and object businesses.
As glasses can no longer be processed after production, some essential details have to be observed for measurement.
Please determine exact height and width sizes of your glass top and circumferentially extract 3 mm „air“ when installing the glass with glue. You can subsequently seal joints with silicone. For installation with the fixing profile please deduct 25 mm from the glass height. For angular cut-outs please indicate their position on the glass (distance from the centre to left/right edge and to bottom edge) as well as the cut-out size in height and width.
For drillings calculate from the hole’s centre and determine the distance to the right/left edge as well as to the bottom edge of the glass. For corner solutions please deduct the thickness value of one glass from the length value of the other glass panel. The recommended minimum glass thickness amounts to 4 mm for a panel size of up to 2000 x 1000 mm and 6 mm for a panel size of up to 3300 x 1000 mm. In case service cuts are requested (e.g. socket cutouts, etc.), we recommend to take a minimum thickness of 6 mm glass (even for smaller cuttosize glass panels).